| |
Features：
General:
- No external memory
required
- Two 10-bit video CMOS
Analog-to-Digital Converters (ADCs) in differential CMOS style
for best S/N-performance
- Fully programmable
static gain or automatic gain control (AGC) the selected CVBS
or Y/C channel : 0~12db (Analog) and 0~18db (Digital)
- Automatic Clamp Control
(ACC) for CVBS, Y and C
- On-chip clock generator
- L-lock system clock
frequencies
- Digital PLL for synchronization
and clock generation from all standards and non-standard video
sources e.g. consumer grade VTR
- Requires only one
crystal (24.576 MHz) for all standards
- Automatic detection
of 50 and 60 Hz field frequency, and automatic switching between
PAL and NTSC standards
- Accepts NTSC (J, M,
4.43), PAL (60, B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1,
L) video signal
- User programmable
luminance peaking or aperture correction
- Adaptive 3/5-line
comb filter for two dimensional chrominance/luminance separation
- PAL delay line for
correcting PAL phase errors
- Multi-standard VBI-data
slicer including closed caption
- MV copy protection
detection
- YUV to RGB color space
converting
- Fully programmable
zoom-out arbitrary ratio in both horizontal and vertical
- Anamorphic zoom for
4:3 video input to 16:9 display converting
- Embedded brightness,
contrast, sharpness and gamma correction
- Embedded Skin-Tone
and CTI
- Embedded programmable
OSD for user Interface
- Embedded programmable
TCON (Timing-Control) generator for LCD interface
- Embedded 2 PWM (Pulse
Width Modulation) generators for general purpose control
|
| |
Input:
- 2 analog inputs,
internal analog source selectors, e.g. CVBS x 2 or Y/C x 1
- 1 of 8-bit digital
video input ports (DIN)
- HSYNC/VSYNC Input
x 1
- Clock Input x 1
- 8-bit Serial RGB Data
format
- ITU-R BT.656 (8-bit)
(CCIR 656)
- Built-in YUV to RGB
color space converter
- Programmable input
port order and pin order
- 5V tolerance input
pads support 5V/3.3V interface
|
| |
Output:
- Support inverse and
frequency adjustment for LCD panel clock
- Analog RGB output
support line invert function
- Support programmable
TCON for Analog TFT LCD panel
- Free-run Synchronization
mode if sync signal disappeared
|
| |
Interface:
- Support Two-Wire
Serial Interface (TWSI) Bus interface
- Support 24C16 serial
EEPROM Script controller (BIT1615)
- Support 24C32 serial
EEPROM Script controller (BIT1615H)
|
| |
OSD:
- Built-in OSD generator
with 128 ROM fonts, 512 mix color
- 3 windows support
overlay function
- 48 user download fonts
- 9 sizes of zooming
font (1/2, x1, x2, x3, x4, x5, x6, x7, x8)
- Flashing font attribute
- Fringe font attribute
- Transparent overlay
for OSD windows
- Support external OSD
interface
|
| |
Power
Management:
- 1.8V power source
for core,
- 2.5V power source
for DAC digital core
- 3.3V power source
for output pads
- 5.0V Power source
for DAC output
- Power Consumption
less than 300 mW
|
| |
Package:
|
| |
|
|
|
 |
