BIT1518
JPEG Decoder with Image processor and T-CON
Features
General:
- No external memory required
- On-chip clock generator
- Fully programmable zoom-out arbitrary ratio in both horizontal and vertical
- Embedded brightness, contrast, sharpness and gamma correction
- Embedded programmable OSD for user Interface
- Embedded programmable T-CON (Timing-Control) generator for LCD interface
- Embedded 3 PWM (Pulse Width Modulation) generators for general purpose control
- Embedded IR remote control decoder and encoder
Output:
- 3x8 Bits digital output ports (R,G,B)
- 9 Bits TCONT ports(T)
- Programmable RGB output port order and pin order
- Maximum output pixel frequency 75MHz@ digital output
- Support inverse and frequency adjustment for LCD panel clock
- Support programmable H/V sync. for LCD panel
- Support programmable T-CON for LCD panel
- Support Delta and Stripe types LCD panel
- Support 8 bits Serial-RGB Panel output
- Support 8-bits ITU656 output
- Support i80/M68 interface output
- Free-run Synchronization mode if sync signal disappeared
Interface:
- Support Two-Wire Serial Interface (TWSI) Bus interface
- Support 25Cxx Serial Flash Boot 8051 controller
OSD:
- Built-in OSD generator with 128 ROM fonts
- 6 windows support overlay function
- 8192 x16 prgrammable OSD Memory
- Support 1BP(2 colors),2BP(4 colors),4BP(16 colors) and 8 BP(256 colors) font colors
- Programmable font size(12x16 ~ 16x16)
- Independent zoom ratio x1~x16 for horizontal and vertical direction
- Programmable Vertical Direction Line Space
- Programmable Horizontal Character Space
- Flashing font attribute
- Fringe font attribute
- Transparent overlay for OSD windows
- 512 sets of look up table palette color support 16777216 depth
AOSD:
- Built-in Advanced OSD Engine
- 1 Background + 3 sub-windows support overlay function
- Support 4/8 BP(16/256 colors) font colors
- Support Hardware Animation Engine
- Support RLC Engine to reduce OSD data size
- Transparent overlay for OSD windows
- 512 sets of look up table palette color support 16777216 depth
Power management:
- 1.8V power source for core,
- 3.3V power source for output pads
Package:
- LQFP 100 pins