BIT1607
10-Bit Digital Video Decoder
Features
General:
- No external memory required
- Two 10-bit video CMOS Analog-to-Digital Converters (ADCs) in differential CMOS style for best S/N-performance
- Fully programmable static gain or automatic gain control (AGC) the selected CVBS or Y/C channel : 0~12db (Analog) and 0~18db (Digital)
- Automatic Clamp Control (ACC) for CVBS, Y and C
- On-chip clock generator
- L-lock system clock frequencies
- Digital PLL for synchronization and clock generation from all standards and non-standard video sources e.g. consumer grade VTR
- Requires only one crystal (24.576 MHz) for all standards
- Automatic detection of 50 and 60 Hz field frequency, and automatic switching between PAL and NTSC standards
- Accepts NTSC (J, M, 4.43), PAL (60, B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L) video signal
- User programmable luminance peaking or aperture correction
- Adaptive 3/5-line comb filter for two dimensional chrominance/luminance separation
- PAL delay line for correcting PAL phase errors
- Multi-standard VBI-data slicer including closed caption
- MV copy protection detection
- YUV to RGB color space converting
- Fully programmable zoom-out arbitrary ratio in both horizontal and vertical
- Anamorphic zoom for 4:3 video input to 16:9 display converting
- Embedded brightness, contrast, sharpness and gamma correction
- Embedded CTI
- Embedded programmable OSD for user Interface
- Embedded 3 PWM (Pulse Width Modulation) generators for general purpose control
Input:
- 3 analog inputs, internal analog source selectors, CVBS x 3 or Y/C x 1 or (Y/C x 1 + CVBS x 1) or YpbPr x 1
Output:
- Maximum output pixel frequency 75MHz@ digital output
- Support inverse and frequency adjustment for output clock
- Support 8 bits Serial-RGB Panel output
- Support 8-bits ITU656 output
- Free-run Synchronization mode if sync signal disappeared
Interface:
- Support Two-Wire Serial Interface (TWSI) Bus interface
- Support 24Cxx serial EEPROM Boot 8051 controller
OSD:
- Built-in OSD generator with 128 ROM fonts
- 3 windows support overlay function
- 4096 x16 prgrammable OSD Memory
- Support 1BP(2 colors),2BP(4 colors),4BP(16 colors) and 8 BP(256 colors) font colors
- Programmable font size(12x16 ~ 16x16)
- Independent zoom ratio x1~x16 for horizontal and vertical direction
- Programmable Vertical Direction Line Space
- Programmable Horizontal Character Space
- Flashing font attribute
- Fringe font attribute
- Transparent overlay for OSD windows
- 256 sets of look up table palette color support 262144 depth
Power management:
- 1.8V power source for core,
- 3.3V power source for output pads
- Power Consumption less than 300 mW
Package:
- QFN 48 pins